How To Replace The Chain Of Mini Chainsaw
With the continuous development of battery technology, more and more tools have changed from previous cable-powered to battery-powered, and tools have gradually become cordless designs. Among them, the electric saw, as the most common cutting tool, has become the mini chainsaw that is very popular with the public. Many users often have such questions when using mini chainsaws, how can I replace the chain of the mini chainsaw? Why did the cutting ability become worse after I replaced the chain of the mini chainsaw? Next, Hardell will explain to you how to correctly replace the chain of the mini chainsaw.
- Rotate the protection button
Rotate the most important protective cover button on the main body of the mini chainsaw. Remove the protective cover from the mini chainsaw, and we can see the part where the chain, guide bar and mini chainsaw are connected.
- Remove the guide bar and chain
The chain of the mini chainsaw is attached to the chain. Take the guide bar and chain out of the mini chainsaw and remove the chain from the guide bar.Related reading:How to oil the chain of mini chainsaw
- Install the chain on the guide plate
Install the replaced chain on the guide plate. At this time, it should be noted that different chains correspond to guide plates of different sizes, and the sizes must be unified for normal use. Pay special attention to the direction of the chain when installing the chain. If it is installed in reverse, it will cause the chain to idle and fail to cut wood.
- Install the guide plate on the mini chainsaw
Install the guide plate on the mini chainsaw. Note that the guide plate should be accurately stuck on the mini chainsaw during installation so that the mini chainsaw can operate safely.
- Rotate the screw
Adjust the screw of the mini chainsaw so that the chain on the guide plate fits more tightly on the guide plate. Pay attention to the appropriateness. Too tight will cause the chain to generate great resistance when running.Related article:How to change blade on cordless reciprocating saw
I believe that you have read the above content and know how to replace the chain of the mini chainsaw. If you want to know how to lubricate the chain on the mini chainsaw, you can click on the link. If you are still worried about the limitations of the wired chainsaw, then I suggest you choose to buy the Hardell Mini Chainsaw, which is equipped with a high-probability battery, which can complete the cutting task for a long time, and is equipped with accessories such as lubricating oil and chain to facilitate your maintenance and maintenance. Hurry up and click on the picture below to buy it, there are discounts if you buy it now!
