How To Change Blade On Cordless Reciprocating Saw

Replacing the saw blade of a cordless reciprocating saw is a process that requires careful operation. With the continuous development of technology, many cordless reciprocating saws now do not require additional tools such as screwdrivers to replace the saw blade. Next, we will take the Hardell cordless reciprocating saw as an example to show you how to change the saw blade on the cordless reciprocating saw.

1、 Steps to replace the cordless reciprocating saw blade

Power outage and inspection

Firstly, ensure that the cordless reciprocating saw is turned off and the power is disconnected (for cordless devices, this usually means that the battery has been removed or the device is turned off) to prevent accidental start-up when replacing the saw blade.

Check if the selected saw blade matches the model and specifications of the cordless reciprocating saw, including size, tooth profile, and material.Related reading:What is the cordless reciprocating saw

means of preparation

Prepare the necessary tools for replacing the saw blade - gloves.

Disassemble the old saw blade

The clamping device of the rotating cordless reciprocating saw head extracts the saw blade from the clamping device.

Carefully remove the old saw blade from the clamping device, avoiding touching the sharp edges of the blade directly with your hands.

Cleaning and Inspection

Use a brush or compressed air to remove dust and sawdust from the interface area of the saw blade, ensuring that the interface is clean and free of debris.

Install a new saw blade

Place the new saw blade in the clamping device, ensuring that the saw teeth of the blade are facing correctly (usually towards the front end of the tool).

Gently push the saw blade into the clamping device to ensure that it is firmly fixed (at this time, keep the clamping device of the reciprocating saw head rotating to the right).

test run

Before reconnecting the power supply (or installing the battery), gently shake the saw blade to confirm that it is securely fixed and not loose.

Connect the power source (or install the battery) and turn on the cordless reciprocating saw for a brief test run to check if the saw blade runs smoothly, without any abnormal noise or vibration.

2、 Precautions for replacing saw blades

safety first

During the entire replacement process, it is essential to ensure that the cordless reciprocating saw is turned off and disconnected from power (or the battery is removed) to prevent accidental start-up. Wear appropriate personal protective equipment, such as gloves and goggles, to prevent hand injuries and eye injuries from splashes.Related article:Differences Between Cordless Chainsaws And Cordless Reciprocating Saws

Choose the appropriate saw blade

Choose the appropriate saw blade based on the material to be cut. Different materials require different types of saw blades, such as woodworking saw blades for wood and metal saw blades for metal. Pay attention to the tooth profile of the saw blade and choose a blade suitable for specific cutting tasks to improve cutting efficiency and reduce blade wear.

Maintain blade balance

Check if the saw blade is balanced before installation. Unbalanced saw blades will produce severe vibrations during high-speed operation, affecting cutting efficiency and blade lifespan. Ensure that the saw blade is installed perpendicular to the cutting surface to ensure accuracy and stability of the cutting.

Correct operation

Follow the manufacturer's instructions and guidelines when replacing the saw blade, and do not use inappropriate tools or methods. Gently operate to avoid damage to the saw blade or clamping device.

Regular maintenance

After replacing the saw blade, clean the body and blade interface area of the cordless reciprocating saw in a timely manner to prevent dust and sawdust accumulation.

Cooling and lubrication

Although cordless reciprocating saws may not overheat as easily as wired devices during the cutting process, prolonged continuous use may still cause the saw blade temperature to rise. Therefore, appropriate rest should be taken during the cutting process to allow the saw blade to cool down.Related reading:What are the uses of cordless reciprocating saw

To achieve more efficient cutting results and extend the lifespan of the saw blade, it is recommended to use coolant or lubricant during the cutting process to reduce the temperature of the saw blade and minimize frictional resistance.

Replacing the saw blade of a cordless reciprocating saw is a process that requires careful operation. By following the above steps and precautions, the safe replacement of the saw blade and the normal operation of the equipment can be ensured. At the same time, regular maintenance and upkeep of the cordless reciprocating saw are also key to improving its service life and cutting efficiency. If you want to purchase a Hardell Cordless Reciprocating Saw, you can click on the picture below to buy it directly. There will be discounts when purchasing now!