Weed Burner Torch
- 1,000,000BTU Heat Putout
- 35INCH Total Length
- 2.4INCH Huge Nozzle
Three Layer Gas Hose
Outer PVC layer - Flame and wear resistant
Mid-layer sandwich - Reinforced explosion-proof
Inner layer of rubber - Pressure and corrosion resistant
Two Modes Flame Control
Ergonomic anti-slip handle design provides a comfortable grip and minimizes hand fatigue.
60mm Big Nozzle
60mm big nozzle combined with seamless one-piece molding design to prevent air leakage, airtightness will be better.
Ergonomic Anti-slip Handle Design
Ergonomic anti-slip handle design provides a comfortable grip and minimizes hand fatigue.
Project | Information |
---|---|
Brand | Hardell |
Item Weight | 16 Ounces |
Material | Stainless Steel |
Manufacturer | Hardell |
Batteries Included? | No |
Power Source | Manual, Gasoline, Battery |
Product Dimensions | 2.8"L x 34.6"W x 5.9"H |
Maximum Temperature | 1648 Degrees Celsius |
Batteries Required? | No |
It can be used to remove weeds, remove insects in every location you can think of, use it to deal with ice and snow, use it to start fires, support various outdoor activities, trees, vines, bamboo and other vegetation, use it to remove paint, melt roof asphalt, etc. , you can use wherever you want. Please let your imagination run wild!
Not dangerous at all. Instructions are included on the product page. It doesn't give the effect of spreading fire in the scene you need to use it. But what you need to pay attention to is that when dealing with weeds, it should be noted that it is not in extreme windy weather, and there should not be more flammable objects nearby, otherwise it is recommended that you prepare a bucket for emergencies.
In the case of sufficient natural gas, it can be used all the time. But we recommend taking a break after 20 minutes of continuous use.
Pressing the push button Ignitor lightly is more suitable than pressing it hard, and the weak and steady airflow is easier to start the fire.
Be careful not to spray fire close to the ground, it is best to keep a moderate distance.
Normally no, unless you burn the same place every day.
Please remember you are working with a live flame and flammable propane tank. Common sense is key when operating your flame weeding torch kit. We recommend flaming your weeds in the morning when the air and ground is dewy. Never flame conifers (evergreens, etc.) as they are highly flammable. You may also have a garden hose close for comfort.
Yes, however you don't want to! You only want to heat the leaves of the weed in need of removal. If the weed is "burned to a crisp", the plant will shut down its photosynthesis system (process in which a plant produces its energy to survive and thrive), only to grow back from the unharmed root a few days later. The flaming process is a slow kill. By heating the leaves, you disrupt the structure of the cells therefore killing the plant and the roots from which it grows. It will take only a few days for weeds to dry up.
Poisonous weeds are not to be flamed! The vapor caused when flaming poisonous weeds is released into the air and can land on your skin causing irritation, as well as inhaled which may cause serious health issues.
Of course! You just need to buy the adapter on this page.
Our products have one year warranty.
"We normally process within 2 working days after you place the order and shipping takes 2-7 working days for all US orders. "
We now conduct the 20-natural-day zero-risk purchase policy at Hardell.The specific Terms can read our Return, Refund & Exchange Policy on the footer of the page.
I tried it to melt snow outside my house and it actually worked! I love it!
I think it's useful to melt the ice.Better than i thought!
35 in Weed Burner Torch. For $80 the packaging was genuinely horrendous. The box was ripped to the point that I just pulled the product right out of the package. There was an unbelievably large hole on the end of the ONE flimsy box that it was shipped in. A thin box with not a single thing to keep it secure during shipping. The hole was so big that the $15 adapter piece that I purchased seemed to have just fallen out. HOWEVER, I received the adapter separately a few days later, so it least it hadn’t fallen out during shipping, but that’s how bad the packaging came. It was so shocking I took pictures.
Okay but here’s the kicker. We leave the product on our kitchen counter for maybe 10 minutes and suddenly it starts screaming. Like almost literally. It started making this crazy high pitch noise and I knew it the propane was leaking so I rush it outside and the adapter freezes making it SUPER hard to touch or unscrew or anything helpful so I have to just leave it outside to just dump propane into the air. Healthy for sure. The $15 adapter that I had to wait for to even try the product out breaks of course!
The torch itself is constructed well enough , however, works! Confusing at first, but once you get it, it is very powerful and would probably work pretty well as intended. I just bought it for the flame-thrower “vibes”, so I won’t be finding out any time soon. I’m not sure if it was worth $80 maybe like $39 Plus, I feel like more people would purchase it. It’s definitely worth $40!
All in all, if they lowered the price and I, for some reason, needed another one, I’d buy this exact product again! Not that adapter though! Until they fix it.