Weed Burner Torch
- 1,000,000BTU Heat Putout
- 35INCH Total Length
- 2.4INCH Huge Nozzle







Three Layer Gas Hose
Outer PVC layer - Flame and wear resistant
Mid-layer sandwich - Reinforced explosion-proof
Inner layer of rubber - Pressure and corrosion resistant

Two Modes Flame Control
Ergonomic anti-slip handle design provides a comfortable grip and minimizes hand fatigue.

60mm Big Nozzle
60mm big nozzle combined with seamless one-piece molding design to prevent air leakage, airtightness will be better.

Ergonomic Anti-slip Handle Design
Ergonomic anti-slip handle design provides a comfortable grip and minimizes hand fatigue.
| Project | Information |
|---|---|
| Brand | Hardell |
| Item Weight | 16 Ounces |
| Material | Stainless Steel |
| Manufacturer | Hardell |
| Batteries Included? | No |
| Power Source | Manual, Gasoline, Battery |
| Product Dimensions | 2.8"L x 34.6"W x 5.9"H |
| Maximum Temperature | 1648 Degrees Celsius |
| Batteries Required? | No |
It can be used to remove weeds, remove insects in every location you can think of, use it to deal with ice and snow, use it to start fires, support various outdoor activities, trees, vines, bamboo and other vegetation, use it to remove paint, melt roof asphalt, etc. , you can use wherever you want. Please let your imagination run wild!
Not dangerous at all. Instructions are included on the product page. It doesn't give the effect of spreading fire in the scene you need to use it. But what you need to pay attention to is that when dealing with weeds, it should be noted that it is not in extreme windy weather, and there should not be more flammable objects nearby, otherwise it is recommended that you prepare a bucket for emergencies.
In the case of sufficient natural gas, it can be used all the time. But we recommend taking a break after 20 minutes of continuous use.
Pressing the push button Ignitor lightly is more suitable than pressing it hard, and the weak and steady airflow is easier to start the fire.
Be careful not to spray fire close to the ground, it is best to keep a moderate distance.
Normally no, unless you burn the same place every day.
Please remember you are working with a live flame and flammable propane tank. Common sense is key when operating your flame weeding torch kit. We recommend flaming your weeds in the morning when the air and ground is dewy. Never flame conifers (evergreens, etc.) as they are highly flammable. You may also have a garden hose close for comfort.
Yes, however you don't want to! You only want to heat the leaves of the weed in need of removal. If the weed is "burned to a crisp", the plant will shut down its photosynthesis system (process in which a plant produces its energy to survive and thrive), only to grow back from the unharmed root a few days later. The flaming process is a slow kill. By heating the leaves, you disrupt the structure of the cells therefore killing the plant and the roots from which it grows. It will take only a few days for weeds to dry up.
Poisonous weeds are not to be flamed! The vapor caused when flaming poisonous weeds is released into the air and can land on your skin causing irritation, as well as inhaled which may cause serious health issues.
Of course! You just need to buy the adapter on this page.
Our products have one year warranty.
"We normally process within 2 working days after you place the order and shipping takes 2-7 working days for all US orders. "
We now conduct the 20-natural-day zero-risk purchase policy at Hardell.The specific Terms can read our Return, Refund & Exchange Policy on the footer of the page.
I never received this product. I called your company or emailed several times and never got a person or a call back or email. I got a message from UPS that delivery was attempted 8/14/25 but our road was being asphalted and they could not get through. I’ve called them several times and they said it was on its way. But never came. Please help
Sharon Gorski. [****]
👍
Igniter not working out of the box
Tried to light the torch for the first time and the ignitor switch does not work.
Enjoy burner for the most part. The igniter doesn’t work so I had to continually light it from a lighter. Would burn for a while but tending to go out regularly and I would have to re light with a lighter. When it stayed burning seemed to work pretty well.















