What Can Cordless Reciprocating Saw Cut

As a portable electric tool, the cordless reciprocating saw was designed to perform fast and precise cutting operations without the need for a power cord. These types of tools are widely used in various fields such as woodworking, metalworking, construction, and automotive maintenance. Hardell will give you a brief introduction about what cordless reciprocating saws can cut.

1、 Main cutting objects

wood

Cork and Hardwood: Cordless reciprocating saws can easily handle various hardness woods, including pine, oak, beech, etc. Both straight and curved cutting can achieve good results.

Boards and wooden strips: In woodworking, cordless reciprocating saws are commonly used to cut boards, wooden strips, etc., especially in situations where frequent movement of the work site is required, and their portability advantage is particularly evident.

Metal

Thin metal plates: such as aluminum plates, copper plates, thin steel plates, etc., cordless reciprocating saws equipped with suitable metal cutting blades can perform effective cutting. However, it should be noted that for thicker metal plates, higher power saws or other cutting methods may be required.

Metal profiles, such as angle iron and channel steel, can also be cut to a certain extent by cordless reciprocating saws, but the material of the saw blade and whether the saw power is sufficient also need to be considered.

Plastic

Various types of plastic sheets, pipes, etc. can be easily handled by cordless reciprocating saws. Due to the relatively soft plastic material, there is less heat and debris generated during cutting, making the cutting process relatively smooth.

compound material

Some special composite materials, such as fiberglass board, carbon fiber board, etc., can also be cut by cordless reciprocating saws equipped with corresponding saw blades. However, it should be noted that these materials may have special physical and chemical properties, and caution should be exercised when cutting.Related reading:What can mini chainsaw cut

2、 Other cuttable objects

In addition to the main cutting objects mentioned above, cordless reciprocating saws can also cut the following items under specific conditions:

Ceramic tiles and stone: Although this is not the main application scenario of cordless reciprocating saws, they can also be cut to a certain extent with dedicated ceramic tile or stone cutting saw blades. However, it should be noted that the cutting effect may not be as precise and smooth as professional equipment.

Rubber and leather: In specific industries such as automotive interior manufacturing, shoe manufacturing, etc., cordless reciprocating saws can also be used to cut soft materials such as rubber and leather.Related article:What are the uses of reciprocating saw

3、 Precautions for use

Choosing the appropriate saw blade: As mentioned earlier, cutting objects of different materials require the use of saw blades of different materials and specifications. Therefore, before using a cordless reciprocating saw for cutting, it is important to ensure that the blade selection is correct.

Maintain blade balance: The blade needs to undergo strict balance testing before installation to ensure that it does not produce severe vibrations during high-speed operation. If the saw blade is found to be unbalanced, it should be immediately stopped from use and adjusted or replaced.

Correct operation method: When using a cordless reciprocating saw, the cutting direction should be kept consistent with the saw blade direction to avoid reverse cutting. At the same time, the speed and feed rate of the saw blade should be adjusted as needed to avoid damage to the saw blade or poor cutting effect caused by improper operation.

Pay attention to cooling and lubrication: During the cutting process, the saw blade generates a large amount of heat. In order to extend the lifespan of the saw blade and ensure cutting efficiency, attention should be paid to cooling and lubrication at all times. Coolant or lubricant can be used to lower the temperature of the saw blade and reduce frictional resistance.

Regular inspection and maintenance: Regularly check the wear of the saw blade, whether the fasteners are loose, and other items to ensure the normal operation of the cordless reciprocating saw. If any abnormal situation is found, the machine should be stopped immediately for inspection and corresponding measures should be taken for repair or replacement.Related article:How to change blade on cordless reciprocating saw

Cordless reciprocating saws have been widely used in various fields due to their portability and efficiency. Whether it is wood, metal, plastic or other composite materials, as long as the appropriate saw blade is selected and the correct operating method is mastered, good cutting effects can be achieved. However, it should be noted that safety operating procedures must be followed during use, and equipment must be regularly inspected and maintained to ensure safe use and work efficiency. If you want to buy a cordless reciprocating saw but find it expensive, then I recommend choosing the Hardell Cordless Reciprocating Saw, which only costs less than $70 and has reliable quality. There are more discounts available for purchasing now. Click on the image below to buy now.